CD Process

cd

process

Similar to all other decontamination methods, CD gas decontamination is a multi-step process. The 5 steps of the CD gas process are pre-condition, condition, injection, exposure, and aeration.

Pre-condition

Raising of relative humidity (RH) levels to between 60-75%.

Condition

Hold time once relative humidity set point has been reached.

Charge

Generation and delivery of chlorine dioxide gas.

Exposure

Hold time once gas concentration set point has been reached.

Aeration

Removal of chlorine dioxide gas from chamber.

Accumulated PPM-HRS

The Exposure step is controlled through an “area under the curve” accrual of gas concentration until a target dosage has been met.

Cycle Progression

Process Advantages:

Safer on materials thanVPHP, bleach, ozone, and liquid chlorine dioxide solutions

  • Non-carcinogenic
  • Non-flammable at use concentrations.
  • Non-explosive at use concentrations, no need for Damage Limiting Construction (DLC). Chlorine dioxide can become explosive at concentrations of 10% in air, however normal use concentrations are 0.04%, approximately 250 times less.
  • Residue free process

Chlorine dioxideis a true gas at ambient temperature

  • Complete distribution as chlorine dioxide is governed by gas laws
  • No condensation, quick aeration

accurate concentration monitoring

  • DUE TO ITS YELLOW-GREEN COLOR, CHLORINE DIOXIDE CAN BE ACCURATELY MEASURED WITH A SPECTROPHOTOMETER
  • OTHER AGENTS, SUCH AS VPHP, CANNOT BE ACCURATELY MONITORED AS CONCENTRATION IS NOT UNIFORM THROUGHOUT AREA DUE TO CONDENSATION AND DISTRIBUTION GRADIENTS

size scalable

  • The chlorine dioxide gas decontamination process can be easily scaled up to volumes of millions of cubic feet.

flexible process

  • EFFECTIVE AT LOW CONCENTRATIONS
  • EFFECTIVE OVER WIDE TEMPERATURE RANGE
  • EFFECTIVE AGAINST A WIDE RANGE OF ORGANISMS